XY-5 CORE DRILL

XY-5 is spindle-type drilling machine.It is mainly used for deep hole core drilling.                                          XY-5 CORE DRILL                                           

                                              

XY-5 is a mechanical transmit hydraulic feeding spindle-type core drilling machine. It is suitable for deeper core drilling and geophysical exploration. It is widely used in the exploration of geology, hydrology, metallurgy and coalfield. It is also used for drilling pile hole and medium and deep water well as well as shallow oil and gas well.

Hydraulic chuck and automatic centring manual chuck are assembled on the spindle, and hoist is equipped with water brake. XY-5 is mainly used for core drilling with diamond bits for exploration of the solid mineral deposits. 

       • High spindle speed and wide range adjustable.

       • Equipped with water brake, more steady, safety and long life of brake band.

       • XY-5A adopting connecting bar force increasing spring clamping and hydraulic loosen chuck

         system. Large clamping force, high reliability and long life service.

       • XY-5A equipped with automobile gear-box, clutch and universal drive shaft.

       • Easy to operate and maintain. Low running cost.

       • Diesel engine or motor equipped as required.

SPECIFICATIONS

DRILLING CAPACITY	XY-5	XY-5A
Core Drilling
Φ50 Drilling Rod	1500m	1500m
Φ60 Drilling Rod	1200m	1200m
Wire-line Core Drilling
S59 Drilling Tools	1500m	1500m
S75 Drilling Tools	1200m	1200m
S95 Drilling Tools	900m	900m
BQ Drilling Tools	1600m	1600m
NQ Drilling Tools	1300m	1300m
HQ Drilling Tools	900m	900m
DRILLING ANGLE	90°-80°	90°-70°
DRILL HEAD
Spindle I.D.	96mm	97mm
Spindle Speed            Forward	87,170,267,301,362	41,69,115,134,189,222,270
(rpm)	591,928,1262	332,371,610,871,1071
Reverse	67, 230	42, 172
Spindle Stroke	500mm	600mm
Max. Torque of Spindle	6300N.m	5200N.m
Dia. of Feeding Cylinder	105mm
Max. Feeding Force of Spindle	90kN	96kN
Max. Lifting Force of Spindle	135kN	140kN
HOIST
Hoist Capacity (Single Rope)	40kN	55kN
Lifting Speed  (m/s)	0.89,1.74,2.73,3.18,3.74,6.08	0.74-3.59
Wire Rope	Φ18.5(6X37)mm	Φ18mm
Drum Capacity (Six Layers)	140m	140m
HYDRAULIC PUMP	YBC45/80 Gear Pump	CBTL-E430/E410-AFH
Displacement (L/min)	40L/min	30+10L/min
Working Pressure	8MPa	8MPa
Max. Pressure	12MPa	12MPa
WATER BRAKE
Working Speed	700-1800rpm	700-1800rpm
Balance Speed	3-8m/s	3-8m/s
Balance Load(single rope)	45kN	50kN
SKID-TYPE FRAME
Retraction Stroke	450mm	500mm
POWER UNIT
Electric Motor	Y250M-4-B3;55kW; 1480rpm	Y225M-4B35; 45kW;1480rpm
Diesel Engine	4135G; 80Hp; 1500rpm	R4105 IZLD; 75kN; 1500rpm
Overall Dimension  LxWxH	3190X1495X2140mm	5360X2200X3315mm
Weight (without power unit)	3500kg	5000kg

XY-5 CORE DRILL